SR-DBM-01 Dropper Assembly Production Equipment

  • Accurate positioning, timely selection of defective products
  • The length of the dropper can be adjusted according to the customer’s size, up to 100mm
  • There is a product legacy detection process to better identify problems and shorten operation time
  • When the machine is short of material, the light will flash and the fault location will be displayed
  • Touch screen, simple operation

Lisainformatsioon

Product Model

SR-DBM-01

Delivery Date

90 päevadel

Production Capacities

60-66 pcs/min

Dimension(l*w*h)

4m*5.2m*2.1m

Voltage

Standard 220v, Customizable

Dropper Feeding Station
Dropper Feeding Station
Lae alla: Dropper Bottle Machine Main ↑

Specification

Place the dropper ring, feed it through the conveyor belt, when the Collar enters the workstation, the conveyor belt flips, then the rotating disk rotates, and the Collar is turned to the inspection station (check whether there is a Collar at the inspection station), the rotating disk continues to rotate, and turns to the station where it is assembled with the dropper rubber head, the rubber head enters the corresponding track through the feeding conveyor belt, the Collar is matched with the rubber head, the rotating disk continues to rotate, and the Collar and the rubber head are firmly assembled, the rotating disk continues to rotate to the dropper station, match the three-piece set, fix and press the dropper and the Collar rubber head, the rotating disk rotates to the product outlet, finished and defective products are selected, the rotating disk continues to rotate, and detects whether there is a product at the production station, if there is no product, it continues to run, if there is a product, error adjustment is made.

Meie tehas

Our Factory

Meie teenused

Our Service

Tootmisprotsess

Production Process

Meie müügimeeskond

Our Teams

Miks valida meid

Jah, proovid on tasuta. Kuid kiirkulu on ostja kontol.
Saatmisviisid: EMS, DHL, FedEx, UPS, TNT, Hiina post, jne.

Jah. Oleme kaubandus- ja tootmisettevõte, saame kaupu ise eksportida.

Täielik kontroll monteerimisliinil professionaalse masinaga.
Valmistoote ja pakendi kontroll.

Kaubandustingimused: FOB &CIF ,C&F jne. Maksetähtaeg : T/T , 30% deposiidina, 70% enne saatmist.Valmistoote ja pakendi kontroll.

Ausalt, see sõltub tellimuse kogusest ja hooajast, mil tellimuse esitate. Tavaliselt, kohaletoimetamine on umbes 30-35 päevadel.

Meil on suurepäraste disaineritega arendusmeeskond, kes kujundab uusi tooteid vastavalt kliendi nõudmistele.

Tootepäring

Hankige kiire pakkumine

Vastame aja jooksul 12 tundi, pöörake tähelepanu järelliitega meilile "@song-mile.com".

Samuti, võite minna Kontakti leht, mis annab üksikasjalikuma vormi, kui teil on toodete kohta rohkem päringuid või soovite saada pakkelahendust läbirääkimistel.

Päring: SR-DBM-01 Dropper Assembly Production Equipment

Meie müügieksperdid vastavad aja jooksul 24 tundi, pöörake tähelepanu järelliitega meilile "@song-mile.com".

Andmekaitse

Andmekaitseseaduste täitmiseks, palume teil hüpikaknas üle vaadata põhipunktid. Meie veebisaidi kasutamise jätkamiseks, peate klõpsama nuppu "Nõustu". & Sulge'. Lisateavet saate lugeda meie privaatsuspoliitika kohta. Dokumenteerime teie lepingu ja saate sellest loobuda, minnes meie privaatsuspoliitikasse ja klõpsates vidinal.