SR-PCM-01 Plastic Cap Assembly Machine

  • Accurate positioning, timely selection of defective products
  • All infrared scanning for more accurate positioning
  • There is a product legacy detection process to better identify problems and shorten operation time
  • When the machine is short of material, the light will flash and the fault location will be displayed
  • Touch screen, simple operation

Lisainformatsioon

Product Model

SR-PCM-01

Delivery Date

90 päevadel

Production Capacities

60-66 pcs/min

Dimension(l*w*h)

2m*1.5m*1.8m

Voltage

Standard 220v, Customizable

Plastic Cap Assembly Machine 2
Plastic Cap Assembly Machine 2
Lae alla: Plastic Cap Assembly Machine Main ↑

Specification

First, the lids to be tableted are dumped into the feed chute of the tablet press. Under the action of the elevator, the lids are transported upward along the predetermined track and smoothly arrive at the sorting area. In the sorting area, the lids are arranged in an orderly manner and then enter the conveyor belt one by one.

As the lids move forward on the conveyor belt, the machine starts the automatic detection program. Once the product with the lid facing down is identified, it is immediately rejected to ensure the consistency of the product.

After screening, the neatly arranged lids continue to move forward on the conveyor belt until they reach the bottom of the gasket slot. At this time, the tableting device operates accurately and presses the gasket into the lid. The products that have completed the tableting process are then transported to the finished product box via the conveyor belt, where they are packaged.

The entire production process is equipped with an infrared detection system that can monitor product quality in real time. Once defective products are detected, they will be automatically diverted to the defective box, effectively ensuring the quality of the finished product

Meie tehas

Our Factory

Meie teenused

Our Service

Tootmisprotsess

Production Process

Meie müügimeeskond

Our Teams

Miks valida meid

Jah, proovid on tasuta. Kuid kiirkulu on ostja kontol.
Saatmisviisid: EMS, DHL, FedEx, UPS, TNT, Hiina post, jne.

Jah. Oleme kaubandus- ja tootmisettevõte, saame kaupu ise eksportida.

Täielik kontroll monteerimisliinil professionaalse masinaga.
Valmistoote ja pakendi kontroll.

Kaubandustingimused: FOB &CIF ,C&F jne. Maksetähtaeg : T/T , 30% deposiidina, 70% enne saatmist.Valmistoote ja pakendi kontroll.

Ausalt, see sõltub tellimuse kogusest ja hooajast, mil tellimuse esitate. Tavaliselt, kohaletoimetamine on umbes 30-35 päevadel.

Meil on suurepäraste disaineritega arendusmeeskond, kes kujundab uusi tooteid vastavalt kliendi nõudmistele.

Tootepäring

Hankige kiire pakkumine

Vastame aja jooksul 12 tundi, pöörake tähelepanu järelliitega meilile "@song-mile.com".

Samuti, võite minna Kontakti leht, mis annab üksikasjalikuma vormi, kui teil on toodete kohta rohkem päringuid või soovite saada pakkelahendust läbirääkimistel.

Päring: SR-PCM-01 Plastic Cap Assembly Machine

Meie müügieksperdid vastavad aja jooksul 24 tundi, pöörake tähelepanu järelliitega meilile "@song-mile.com".

Andmekaitse

Andmekaitseseaduste täitmiseks, palume teil hüpikaknas üle vaadata põhipunktid. Meie veebisaidi kasutamise jätkamiseks, peate klõpsama nuppu "Nõustu". & Sulge'. Lisateavet saate lugeda meie privaatsuspoliitika kohta. Dokumenteerime teie lepingu ja saate sellest loobuda, minnes meie privaatsuspoliitikasse ja klõpsates vidinal.