SR-TSM-03 Trigger Sprayer Assembles Machine

The trigger sprayer body is fed through the track, and the rotating disk starts to rotate to inspect the trigger sprayer body. 동시에, the ring is fed with the help of the vibration disk. After the feeding is completed, it is immediately tested. After the trigger sprayer body and the ring are tested and qualified, the two are assembled. After the assembly process is completed, the rotating disk continues to rotate, and the trigger sprayer head enters the refueling stage. 제품 검색, the water sealing head is fed through the vibration disk, and the inspection and assembly work are carried out simultaneously. 이후, the rotating disk continues to rotate, and the water sealing sleeve is fed through the vibration disk. After the feeding is completed, the inspection and assembly are carried out in sequence. 이후, the rotating disk rotates again, and the head cap is fed by the vibration disk. After the feeding is completed, it is first inspected and then the head cap is accurately pressed in. After the head cap is pressed in, the rotating disk continues to rotate and reaches the head cap ventilation inspection station. After the inspection at this station, the rotating disk rotates to the product outlet, where the finished product and defective products are selected. After the selection is completed, the rotating disk continues to rotate, and the product is inspected at the output station. If no product is detected at the production station, the equipment will maintain normal operation; if a product is detected, the equipment will quickly trigger the error reporting mechanism and automatically make adjustments to ensure the smoothness and efficiency of the subsequent production process.